Price:
Because of the low thermal conductivity of titanium alloy, the 8A drive circuit was used before, and the plastic gasket was melted due to excessive heat.
At present, the drive circuit has been changed to a 6a linear version.
Parameter:
LED: 1 * SFT40 / XHP50.3 HI
Luminous flux: max 2000LM
Mode: see detailed description later
Brightness memory: Yes
Battery: 1 * 21700 lithium battery flat head without protection board (not included)
Material: Ti
Colour: glossy / stonewash
Waterproof rating: IPX6
Switch type: mechanical switch at the end of the flashlight.
Driver output current: 6A linear for SFT40, 3A for XHP50.3 HI
Reflector type: smooth reflector for SFT40, orange peel reflector for XHP50.3 HI
Lens: ar-coated glass
Size: 26mm (body diameter),27.2mm(head&tail diameter), 126.8mm (length)
Net weight of the flashlight: 123.8g (without packaging, battery, lanyard)
Package gross weight: 150g
Package size:15.2*5.6*4cm
Included accessories: 1*lanyard,
12
groups:
1.click
the switch to turn the flashlight on/off,tap the switch to select mode
2.if
flashlight is turned on,tap the switch 20 times quickly to enter into
config mode.(On a visual interface,as long as you click on an option, it means
that the option is selected. The flashlight has no visual interface. It flashes
to represent an option, and “tap the switch in the flashing process”
means to select the option.)
Option
1 (normal-flash 1 time + buzz-flash): tap the
switch to enter into sub-option to select the mode group,If the user has no
operation, the config mode will enter option 2.
————-sub-option
1.1 (normal-flash 1 time) : tap the switch to select mode group 1 (0.1%,
1%, 10%, 35%, 100%, strobe, biking, battery-check)
————-sub-option
1.2 (normal-flash 2 times) : tap the switch to select mode group 2
(0.1%, 1%, 10%, 35%, 100%)
————-sub-option
1.3 (normal-flash 3 times) : tap the switch to select mode group 3
(100%, 35%, 10%, 1%, 0.1%)
————-sub-option
1.4 (normal-flash 4 times) : tap the switch to select mode group 4
(1%, 20%, 100%, strobe, biking, battery-check, SOS)
————-sub-option
1.5 (normal-flash 5 times) : tap the switch to select mode group 5
(1%, 20%, 100%)
————-sub-option
1.6 (normal-flash 6 times) : tap the switch to select mode group 6
(100%, 20%, 1%)
————-sub-option
1.7 (normal-flash 7 times) : tap the switch to select mode group 7
(0.1%, 1%, 10%, 50%, strobe, biking, battery-check, SOS)
————-sub-option
1.8 (normal-flash 8 times) : tap the switch to select mode group 8(0.1%,
1%, 10%, 50%)
————-sub-option
1.9 (normal-flash 9 times) : tap the switch to select mode group 9
(50%, 10%, 1%, 0.1%)
————-sub-option
1.10 (normal-flash 10 times) : tap the switch to select mode group 10
(1%, 10%, 35%, 100%)
————-sub-option
1.11 (normal-flash 11 times) : tap the switch to select mode group 11
(100%, 20%, strobe)
————-sub-option
1.12 (normal-flash 12 times) : tap the switch to select mode group 12(100%
only)
Option 2 (normal-flash
2 times + buzz-flash): tap the switch to active the
mode memory or inactive it,If the user has no operation,flashlight will
enter into the last mode.
battery-check instructions:
<2.95V 1 flash,
2.95-3.25V 2 flashes,
3.25-3.55V 3 flashes,
3.55-3.85V 4 flashes,
>3.85V 5 flashes
About the battery
EVE 50E
Full Model Name: EVE-INR21700/50E
It is manufactured by EVE Energy Co.,
Ltd.,
The typical discharge capacity is
5000mAh (@1000mA,2.5V DC cut-off).
The maximum continuous discharge current
is 15A.
The working temperature is -20 ℃ to 60 ℃.
Liitokala 50E
Full Model Name: Liitokala lii50E
It is manufactured by Liitokala Co.,
Ltd.,
The typical discharge capacity is
5000mAh (@1000mA,2.5V DC cut-off).
The maximum continuous discharge current
is 15A.
The working temperature is -20 ℃ to 60 ℃.
Molicel P42A
Full Model Name: INR-21700-P42A
It is manufactured by E-One Moli
Energy Corp.
The typical discharge capacity is
4200mAh (@800mA,2.5V DC cut-off).
The maximum continuous discharge current
is 45A.
The working temperature is -40 ℃ to 60 ℃.
